manualshive.com logo in svg

DUROMAX DuroStar DS12000EH, Руководство пользователя

Поделиться
Скачать
DUROMAX DuroStar DS12000EH Скачать руководство пользователя страница 13

Connect propane tank

The propane hose is located on the left side of the regulator, 
below the OHV valve cover. Screw the open ACME nut 
connection to your propane tank and turn the tank on.

6.

13

Adjust choke

The choke lever is located above the air filter to the right 

of the recoil start. Slide the lever to the right to open the 
choke and increase air into the carburetor for normal 
running.

7.

Turn breaker on / connect

The breaker is located on the right side of the front power 

panel. Flip the breaker up to allow power to flow to the 

receptacles. Connect your devices to the receptacles on 

the front panel. Start with the largest loads first.

9.

Start

The key switch is located on the left side of the front power 
panel. Insert the key and turn to the start position to start 
the generator. Allow the key to return to the run position 
once started.

8.

Содержание DuroStar DS12000EH





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды