Duroflame Batavia T3, Техническое руководство

Страница: 12 / 43

Page 12 of 43
3.2.3 Connection
Electrical connection
It is important for the stove to be installed by a specialist technician. The connection
to the electricity grid is made by means of the power cable supplied. Make sure the
plug remains accessible at all times when the appliance is installed. Also make sure you
have a well-earthed socket.
The stove is secured using a fuse at the back of the stove.
Connection to the flue duct
This chapter describes the conditions with which the flue duct must comply. These conditions
we prescribe shall in no way be considered a replacement of the existing rules. All local
provisions, including those referring to national and European standards, must be complied
with when installing the flue duct.
The factory is not responsible for the malfunctioning of the stove due to the use of a flue duct
that does not comply with the conditions and regulations.

Have the chimney and the pellet stove installed by qualified personnel.

The internal diameter of the duct must be equal to or wider than 80 mm.

Use steel or stainless steel pipes for the duct; do not use plastic or
aluminium.

Use pipes with a silicone sealing ring for the duct: these can withstand high
temperatures.

Use T-piece for corners to allow inspection during annual maintenance.

The connection between the stove and the chimney must be as short as possible
to ensure a proper draught and prevent condensation.

Do not use a 90° bend (T-piece) more than three times.

Horizontal sections must be under 2 metres, featuring a minimum angle of 5°.

Do not connect more than one device to a flue tube.

Use insulated pipes outdoors to prevent condensation.