15
MAINTENANCE
Remove the battery pack from this tool before cleaning solutions.
This tool is lubricated before it leaves the factory. This lubrication
should last for the life of the tool. No further lubrication is required.
A battery pulse tool is a precision tool. Disassembly, assembly,
adjustment require exclusive JIGS plus testers, and trained techniques. Incorrect
disassembly, reassembly or adjustment can cause not only insufficient power but also
accidents. Ask for these services from an authorized service centre. The maker or
supplier will not be held liable for any damages caused by factors found to be the
cause of faulty use or repair by users or unauthorized service provider.
CLEANING
With the motor running, blow dirt and dust out of all air vents with dry air at least once
a week. Wear safety glasses when performing this. Exterior plastic parts may be
cleaned a damp cloth and mild detergent. Although these parts are highly solvent
resistant, NEVER use solvent.
STORE
Store the tool in a place that remains between 0
℃
-40
℃
, is moisture free, dust free and
free from direct rays of the sun.
PERIODIC INSPECTION
It is recommend to allow a trained service centre to disassemble, adjust the tool and
replace the hydraulic oil every 200,000 cycles (green lamp automatically blink 3
seconds to remind user) or six months whichever comes earlier.
ACCESSORIES
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Recommended accessories for use with your tool are available at extra cost from your
local service centre.
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments should be performed by certified service centres or other qualified
service organizations, always using identical replacement parts.
WARNING
NOTE
DANGER
