Duro 155, Руководство пользователя

Страница: 4 / 5

Changing your Master Code
1) With the safe in open position, press 888888 and . The LED Display will flash .
You will hear 1 short beeps.
2) Enter your new 6 digit Master Code and press
# . When the LED Display flash
, enter your new Master Code and press # . You will hear 2 short beeps.
When the LED Display flash , you had successfully changed the Master Code.
The Master Code will remain when you change the Personal Code.
You are strongly advised to change this Factory Master Code.
The Master Code can override your Personal Code programmed and open the safe.
Factory Master Code:
888888
4
To lock your safe
Use two or more fingers, touch the number pad to activate the safe. Enter your 4-6
digit Personal Code and press
# . The LED Display will show , then . It will
flash the Personal Code again. The locking bolts will engage at the same time.
If you press # within 10 minutes after opening your safe, the safe will lock with your
last entered Personal Code.
If you were to lock your safe 10 minutes after opening, you have to enter your
Personal Code and press
# .
To unlock your safe
1) Activate the safe. Enter your 4-6 digit Personal Code. The LED Display will show
, then . The locking bolts will dis-engage.
“Hidden Code” mode
Press # to trigger the mode. The LED Display will flash .
In this mode, the LED Display will flash when you enter your Personal Code.
To exit the mode, press # . The LED Display will flash
OFF
.
“Hold” mode
The safe automatically enters a 30 minutes “Hold” mode after an invalid code has
been entered 3 consecutive times. In this mode, the safe will not respond to any key
and the LED Display will flash ,where the
30
is the holding time.
After 30 minutes, the safe will return to normal operation.
Override Key
If the electronic lock fails, or you do not have the Personal Code available, you may use
the Override Key to open the safe.
Remove the Key Lock Cap and insert the Override Key. Turn anti-clockwise and lift up
the top panel.