Duro Dyne 14000, Руководство пользователя

Страница: 2 / 22

- 2 -
INTRODUCTION
Duro Dyne is proud to introduce the next generation bulk feed con-
cept of our popular FG-1 pinspotter. The Mach I and Mach II Pinspot-
ters were designed utilizing the best of current technologies to
provide greater power and reliability for insulation fastening.
Trouble free service was the foundation on which the original FG-1 was
built, with proven solid state components located for easy access.
The Mach I and Mach II series continue this concept and bring it
to a new level of reliability, serviceability and efficiency.
This Guide is designed to help you set up and operate your Mach I
or Mach II at peak performance for years to come.
IMPORTANT
Always follow manufacturer’s recommendations for proper safety
and handling procedures for all materials used in conjunction with
this machine as outlined in Manufacturer’s Safety Data Sheet
(MSDS) for each product.
LIMITED WARRANTY
Duro Dyne Machinery is manufactured by skilled mechanics, utilizing
the latest production techniques. Each unit has been rigorously
tested prior to packaging and shipment in order to ensure trouble-
free operation.
Your Duro Dyne machine has a two year warranty against defects
in material. Any component found to be defective will be repaired or
replaced (at the manufacturer’s discretion) at no cost if the faulty
component is returned freight prepaid to the nearest Duro Dyne
Service Department.
The warranty does not apply to expendable parts or repairs or service
due to improper maintenance or operation procedures.
Duro Dyne products have been engineered to maximize operator safety.
Unauthorized modification of this product will void the warranty.
All warranty claims must be accompanied by a serial number, date
of purchase and the name and address of the distributor it was
purchased from.
TABLE OF CONTENTS
Installation Instructions 10
Introduction 2
Maintenance 12
Notes 21
Operation 10
Parts List
22
Parts Locator 3-9
Servicing 15
Troubleshooting 15-21
Warranty 2
Wiring Diagrams
13-14