Dürkopp Adler 667 PREMIUM, Инструкция по эксплуатации

Страница: 39 / 150

Setting the feed dog
Service Instructions 667 PREMIUM - 03.0 - 01/2018 37
12. Tighten the screw (6).

In the process, make sure that the feed dog height has the correct
setting (

p. 38 ).
13. Finish the service routine.
7.3 Setting the feed dog movement
The feed dog moves in an elliptical cycle. To align this correctly, the feed
movement, the stroke height, and the stroke movement of the feed dog all
have to be set.
Order
First, check the following setting:
• Feed dog position (

p. 34 )
7.3.1 Setting the feed dog feed movement
Proper setting
Machine is locked in place at position 1.
The slot of the pusher eccentric and the slot of the connecting rod are in a
line.
To set the feed dog feed movement:
1. Execute the service routine
Feed Dog > Feed Dog Move
(

p. 14 ).

The software is used to define the necessary presettings on the
machine.
2. Lock the machine in place at position 1 (

p. 24 ).
3. Tilt the machine head (

p. 17 ).
4. Remove the oil pan (

p. 23 ).