Dürkopp Adler 667 PREMIUM Скачать руководство пользователя страница 40

Страница: 40 / 150

Setting the feed dog

Service Instructions 667 PREMIUM - 03.0 - 01/2018

FIg. 24: Setting the feed dog feed movement (2)

Loosen the threaded pins (2).

Turn the pusher eccentric such that the slot (1) is in a line with the slot (3)
of the connecting rod.

Tighten the threaded pins (3).

Finish the service routine.

7.3.2

Setting the feed dog height at top dead center

The feed dog reaches the maximum stroke height at top dead center.

Proper setting

Place the feed dog in the uppermost position by turning the handwheel.



The upper edge of the feed dog protrudes 0.5 mm above the throat
plate.

To set the feed dog height at top dead center:

Execute the service routine

Feed Dog > Pos To Needle

(



p. 14



The software is used to define the necessary presettings on the
machine.

Turn the handwheel until the feed dog is at its highest position.

Tilt the machine head (

Remove the oil pan (

(1)

- Slot of the pusher eccentric

(2)

- Threaded pins

(3)

- Slot of the connecting rod

①

②

③

Содержание 667 PREMIUM























































































































































Результаты поиска

Содержание 667 PREMIUM

Отзывы:

Бренды по названию

Популярные бренды

Dürkopp Adler 667 PREMIUM, Инструкция по эксплуатации

Результаты поиска

Содержание 667 PREMIUM

Отзывы:

Бренды по названию

Популярные бренды