Dürkopp Adler 550-867, Дополнительные инструкции

Страница: 7 / 28

Setting up the fingerprint scanner
Additional Instructions 550-867 - 01.0 - 02/2019 5
Fig. 3: Determining the software version (2)
 The installed software version is displayed.
2. Confirm with OK to close the window.
If the software version is older than version
V16.8
(status March 2017),
update the software version ( 
p. 5
).
2.2 Updating the software
Order
1. Determine the software version ( 
p. 4
).
2. Update the software version .
3. Connect the fingerprint scanner ( 
p. 9
).
4. Set up the USB port ( 
p. 11
).
5. Activate the fingerprint scanner ( 
p. 13
).
Software versions
V16.8
and later make it possible to insert a fingerprint
scanner into the machine.
For software versions
V16.7
and earlier, the software MUST be updated
for the fingerprint scanner to function properly.
Information
The latest software version has been included on the USB key.
To update the software on the control panel:
1. Switch on the machine ( 
Operating Instructions
).
2. Log in with security level 2 .
 The display switches to: