manualshive.com logo in svg

DURKOPP ADLER PURE 967, Руководство по эксплуатации

Поделиться
Скачать
DURKOPP ADLER PURE 967 Скачать руководство пользователя страница 8

About these instructions

6

Operating Instructions 967 PURE - 00.0 - 12/2020

1.4

Liability

All information and notes in these instructions have been compiled 
in accordance with the latest technology and the applicable 
standards and regulations.

Dürkopp Adler cannot be held liable for any damage resulting 
from:

• Breakage and transport damages

• Failure to observe these instructions

• Improper use

• Unauthorized modifications to the machine

• Use of untrained personnel

• Use of unapproved parts

Transport

Dürkopp Adler cannot be held liable for breakage and transport 
damages. Inspect the delivery immediately upon receiving it. 
Report any damage to the last transport manager. This also 
applies if the packaging is not damaged. 

Leave machines, equipment and packaging material in the con-
dition in which they were found when the damage was discovered. 
This will ensure any claims against the transport company.

Report all other complaints to Dürkopp Adler immediately after 
receiving the product.

Содержание PURE 967





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды