DURKOPP ADLER DAC classic 281, Руководство по эксплуатации

Страница: 58 / 74

Set-up
Operating manual 281 Version 06.0 - 05/2013 56
7.6 Setting the working height
The working height is continuously adjustable between 750 and
900 mm (clearance between the floor and upper edge of the table
plate).
Figure 33: Setting the working height
1. Loosen all four screws (1) on the head sections.
2. Set the table plate
to the desired height.
Important:
Pull out or push in the table plate evenly at both
sides to prevent it from jamming.
3. Tighten the screws (1) on the head sections.
(1) - Screws
①
①