DURKOPP ADLER 550-12-33, Руководство по эксплуатации

Страница: 69 / 200

Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017 67
0 – 16
Ruffling type and ruffling value
The ruffling type and the ruffling value are shown on
the display.
Caution: While it cannot be selected, this selection can
be changed.
• To select the ruffling type , press the button.
• : Ruffling top and bottom
• : Ruffling top
• : Ruffling bottom
Setting the ruffling value
Value range: 0-16
Notice: There are no buttons 11, 13, and 15. In order
to, for instance, set the ruffling value 11, press the two
adjacent buttons, i.e. button 10 and button 12, at the
same time.
• To change the
ruffling value , press the numeric
button/s.
Select possible ruffling types:
• Ruffling top and bottom
• Ruffling top
• Ruffling bottom
Stitch length
Value range: 3.0 – 6.0 mm
• Use

/

to select the parameter.
• Use

/

to change the stitch length.
Needle thread tension
Value range: 1 – 99, preset at 40 %
• Use

/

to select the parameter.
• Use

/

to change the needle thread tension.
Setting the parameters

p. 68
Stitch counter of the current seam section
After the thread has been cut, the display is retained.
Measurement restarts when sewing starts again.
F, S No function assigned
Symbol Meaning