DURKOPP ADLER 512-211-01, Инструкция по эксплуатации

Страница: 65 / 82

Maintenance
Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016 63
13 Maintenance
This chapter describes maintenance work that needs to be carried out on
a regular basis to extend the service life of the machine and achieve the
desired seam quality.
13.1 Cleaning
Lint and thread remnants should be removed after every 8 hours of ope-
ration using a compressed air gun or a brush. When sewing very fluffy ma-
terial, the machine should be cleaned more frequently.
A clean sewing machine provides protection from faults.
Points that need to be cleaned particularly thoroughly:
• Area under the throat plate (1)
• Area around the hook (2)
• Bobbin housing and interior
• Thread cutter
• Area around the needle
Work to be carried out Operating hours
8 40 160 1000
Removing lint and thread remnants

Clearing the fan screen at the control box

Refilling oil

Lubricating the sewing automat

WARNING
Risk of injury from flying particles!
Flying particles can enter eyes, causing injury.
Wear safety goggles.
Hold the compressed air gun so that the particles
do not fly close to people.
Make sure no particles fly into the oil sump.