background image

MAL_Starck_S19721/16.12.1

Furniture complies with applicable requirements of the referenced standard(s): 

Safety Household and Commercial Furnishings (UL 962, 3rd ed. Issued: 07/07/08, Revised: 08/05/13)

Portable Luminaires CSA C22.2 No. 12 - 1982 (R2004)

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical furnishing, basic precautions should always be followed, including the following:

Read all instructions before using this furnishing.

DANGER

 

To reduce the risk of electric shock:

1. Always power down all circuits and disconnect before cleaning.

2. To reduce the risk of electric shock, this furnishing has a polarized plug 

    (one blade is wider than the other). This plug will fit in a polarized outlet only one way. 

    If the plug does not fit fully in the outlet, reserve the plug.

    If it still does not fit, contact a qualified electrician to install the proper outlet. 

    Do not change the plug in any way.

CAUTION:

  

To prevent electric shock, match wide blade of plug to wide slot, fully insert. 

WARNING

 

To reduce the risk of burns, fire, electric shock, or injury to persons:

1.Disconnect from power before putting on or taking off parts.  A minimum of two people is required    

    to remove and replace cabinet doors.

2. Close supervision is necessary when this furnishing is used by, or near children, invalids, or 

    disabled persons.

3. Use this furnishing only for its intended use as described in these instructions. Do not use 

    attachments not recommended by the manufacture.

4. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, 

    if it has been dropped or damaged, or dropped into water. 

    Return the furnishing to a service center for examination and repair.

5. Never drop or insert any object into any opening.

6. Do not use outdoors.

7. Do not operate where aerosol (spray) products are being used or where oxygen is being 

   administered.

8. For loading always put heavier items at the bottom and not near the top in order to help 

    prevent the possibility of the furnishing tipping over.

    MAXIMUM SHELF LOAD IN POUNDS ALLOWED: 6.61 lbs

9. To disconnect, power down all circuits.

10. Risk of Injury to Persons - do not place video equipment such as televisions or computer 

      monitors on furnishing.

11. For grounded products the following statement: 

      WARNING: Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only.

 

GROUNDING INSTRUCTIONS

This product must be connected to a grounded metal, permanent wiring system, or an 

equipment - grounding conductor must be run with the circuit conductors and connected 

to the equipment grounding terminal or lead on the product. ( If provided with a 3 wire system )

ABOUT THE PRODUCT

Products requiring electricity are designed to be switched at the wall and hardwired to a 

circuit provided by the customer. Product should be installed according to electrical code by 

a qualified technician. Read important safety instructions carefully. Direct wetting should be avoided. 

This products is intended for household/residential use only. We reserve the right to make technical 

improvements and to enhance the appearance of the products shown.

SAVE THESE INSTRUCTIONS

Содержание Starck S1 9721








Отзывы: