DURAVIT St.Trop, Руководство по эксплуатации, Страница: 14 / 20

14
Troubleshooting support 9.
Explanation of the flashing modes of the "Service" button
1 0 2 3 4 t / sec
The "Service" button flashes
slowly.
The "Service" button flashes rap-
idly.
The "Service" button flashes
briefly once/twice/three times/
four times.
Problem Potential cause Solution see page
The "Service" button
flashes slowly.
The limescale filter has
exceeded the permissi-
ble number of operating
hours must be changed.
Change the limescale
>
filter.
Reset the water meter.
>
Press the "Service"
>
button to acknowledge
the service message.
15
The
"Service" button
flashes rapidly and the
steam bath does not
start.
The limescale filter has
exceeded the permissi-
ble number of operating
hours must be changed.
The steam bath has
switched off automati-
cally to prevent damage
to the steam generator.
Change the limescale
>
filter.
Reset the water meter.
>
Press the "Service"
>
button to acknowledge
the service message.
15
The
"Service" button
flashes briefly
once and
the shower does not
operate.
The water supply has
been turned off.
Check the water supply
>
line.
The „Service" button
flashes briefly once.
Problem with the limes-
cale filter.
Open the door in the
>
maintenance panel.
Proceed as described in
>
the operating manual
for the replaceable
filter: "Troubleshooting"
chapter.