DURAVIT DuraSystem WD1002 000 000, Инструкция по монтажу

Страница: 7 / 26

600
600
2250
*
0
1
2
0
0-1700
0-
17
00
A
B
S1
S1
K1
S1 S1
K1
M1
M
T1
M1
M
T1
A B
en
Safety areas in accordance with DIN VDE 0100-701
* or the height of the highest shower head
/ water outlet that is permanently installed,
depending on which is higher
DANGER
Risk of fatal electric shock
> Disconnect electrical components from the power supply
before the installation.
> Check that all components are de-energised.
> Prevent the power supply from being switched on
accidentally.
41 Installing the power supply for the SensoWash
®
shower toilet (optional)
> Install the power supply line according to the
technical instructions for the SensoWash
®
.
> Connect the power supply only when the shower
toilet is installed.
43
Pre-installation/planning
> Plan a position for the concealed box:
• within 1700 mm (diagram I)
• outside the protection zones 0 – 2 (diagram II)
> Install a permanent power supply line there:
• Interconnect the switch (version A) or the time-
delay relay with the button/switch (version B)
• Install a separate circuit breaker and residual-
current circuit breaker (RCCB) upstream
• Connect all pole disconnector mains switches
upstream located outside the protection zones
0 – 2 (diagram II)
47
–
51 Mounting the installation set
> Position the concealed box at the designated
point.
61
–
64
Connecting the toilet frame
> Connect the supply line to the transformer.
Circuit diagrams
Version A Version B
MAL_57154/17.10.1
7
Electrical installation
II
I
100-240 V, 50-60 Hz
10 W
I
N
= 16 A
I
ΔN
≤ 30 mA
Power supply
Max. rated power
Circuit breaker
RCCB