DURAVIT Architec 700353 90 Series, Руководство по установке

Страница: 9 / 24

6x
NOTICE
Apply silicone recommended for acrylic
bathtubs only.
> Fill the bathtub with water.
> Apply silicone as needed.
> Let it sit for 24 h before draining.
> Finish wall and tiles.
> Make sure to install water-resistant
wallboard.
> Fill the bathtub with water.
> Inspect for potential leaks.
> Clean the bathtub. > Connect waste and overflow to the
drain system.
WARNING
Fatal injury by electric shock!
Contact with electrical wiring can lead
to electrical shock.
> Make sure that there are no
electrical wires or heating running
under wall or floor which could be
affected by the installation.
> Affix 6 flange clips to the wall frame
for side support of the bathtub.
57221_MAL_Bathtub_Tile flange_US/20.01.2
9
en
18 17 16
15 14 13