14
Chapter2AdjustingScreens
4.
Perform advanced adjustments for the following using “Analog Adjustment” of
“Screen”.
Adjust the clock, phase and position, in this order.
●
To eliminate vertical bars
Procedure
1. Choose “Clock” from the “Analog Adjustment” menu, and press .
2. Adjust the clock with or to eliminate vertical bars.
Press
or
slowly so as not to miss the adjustment point.
3. Press to exit the adjustment.
When blurring, flickering or bars appear on the screen after adjustment, proceed to “To remove flickering or blurring”
to remove flickering or blurring.
●
To remove flickering or blurring
Procedure
1. Choose “Phase” from the “Analog Adjustment” menu, and press .
2. Adjust the phase with or to minimize flickering or blurring.
3. Press to exit the adjustment.
Attention
• Flickering or blurring may not be eliminated depending on your PC or graphics board.
●
To correct the screen position
Note
• Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to display
images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1. Choose “Hor.Position” or “Ver.Position” from the “Analog Adjustment” menu, and press .
2. Adjust the position with or .
3. Press to exit the adjustment.
When vertical bars appear on the screen after adjustment, go back to “To eliminate vertical bars”. (Clock → Phase →
Position)
4. Close Pattern 1.