13
En
gli
sh
Setting Up Touch Panel (FDS1702NT)
Attention
• The monitor can be used as a touch panel only using a PC linked via a network.
• The user account to be used for installing the touch panel driver must have the “Administrators” privilege.
• When reinstalling the touch panel driver to update the driver, etc., restart the PC after uninstalling the driver and then
install it.
1.
Install the touch panel driver to the PC.
1. When the monitor and PC are linked via a network, unlink the connection (see page 12).
2. Uninstall the other touch panel driver, if it is installed.
3. Install the touch panel driver according to the instructions included in the CD-ROM.
For how to install the touch panel driver, see the Touch Panel Driver User’s Manual (on the CD-ROM).
4. Link the monitor and PC via a network (see page 12).
2.
Calibrate the monitor.
Calibrate the monitor according to the Touch Panel Driver User’s Manual (on the CD-ROM).
Adjusting the Screen Angle
Hold left and right edge of the monitor with both hands, tilt the screen to the best condition for working.
Attention
• Be sure that the cables are correctly connected.