4.1 WORKING WITH DUST BAGS
If sucking up dry dust an optional dust bag can be used to collect the dust and
ease the disposal. To insert the dust bag take off the head (see also figure 3).
Insert the dustbag like shown on figure 6. Put on the head again and secure
the head with the clamps.
To vacuum insert the hose (A)
into the suction inlet (B).
To remove the hose twist and
pull in one movement to
remove (C)
4.2 DRY OR WET FLOOR SUCTION
4.3 VACUMING - INSERTING AND REMOVING THE HOSE
The machine can also be used for blowing. In some cases it is
easier first to blow the debris away and then afterwards
collect it.
To use the blow function insert the hose into the blow outlet
(A) in the same way for the suction inlet. See above. The
blowing can be controlled by the lever (B)
To suck up dry dust and debris use the dry floor
nozzle (A) with the bristles rim.
To suck up wet debris replace the brush rim with
a screwdriver and insert the rubber squeegees
4.4 BLOWING - INSERTING AND REMOVING THE
HOSE
4. USING THE VACUUM CLEANER
Read chapter 1 – IMPORTANT SAFETY INSTRUCTIONS of this manual thoroughly before setting up and
using this vacuum cleaner.
FIG. 6
FIG. 7
FIG. 8
FIG. 9
7.
NOTHING IS TOUGHER
PRO30L & PRO31M