Duratuf Sentry Sheds SL1515, Руководство по сборке

Страница: 3 / 15

BEFORE YOU START:

Read all instructions carefully

Identify all parts and check quantities against parts list

Select a level site

Do not mark cladding with pencil as lead can cause corrosion to cladding

During assembly, ensure all drill filings are removed between layers of steel, before riveting together
SAFETY:

Do not attempt to build your shed in high winds

Beware of sharp edges, recommend use of gloves

Protect your eyes and ears

For ease of assembly, use a friend to help
TOOLS REQUIRED:
WARRANTY REQUIREMENTS
:
Following are the minimum requirements for cladding used in Sentry Sheds.

Wash all surfaces annually using a hose and soft nylon brush.

Within 2 km of coast – wash every 3 months as above. After a storm, wash the cladding and the gutters as soon
as possible to remove any highly corrosive salt deposits.

Volcanic Ash Fallout – wash as soon as possible, removing fall out from roof and gutters.

Do not allow manures, chemicals or other corrosive materials to have direct contact with cladding
.
DRILL RIVETER 3.5mm DRILL BIT
HAMMER
LADDER
TAPE MEASURE PEN
NAIL PUNCH
CONGRATULATIONS ON PURCHASING A DURATUF SENTRY SHED.
BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE SOME IMPORTANT POINTS
:
2
SQUARE DRILL BIT