Duratrax Raze, Руководство по сборке и эксплуатации

Страница: 4 / 24

FINISHING
FINISHING
THE RAZE
THE RAZE
• Remove the receiver battery cover from the
receiver case.
• Remove the receiver battery holder from the
receiver cover.
• Install (4) “AA” batteries.
• Reinstall the receiver battery holder to the
cover using the included tie-strap.
• Secure the receiver cover to the receiver case.
TRANSMITTER PREPARATION
RECEIVER BATTERY INSTALLATION
• Install eight “AA” batteries into transmitter, making sure the polarity is correct.
• Insert the antenna into the top of the transmitter and tighten.
• Turn the transmitter on and check the battery light.
• If both LED’s light up, the batteries are acceptable. If only the red LED lights
up, immediately replace the batteries.
4