Duratool D03405, Руководство пользователя

Страница: 3 / 8

5. Display Sections:
The display is divided into 2 sections as below figure shows:
6. Function keys:
The anemometer uses the following keys:
6.1 SET key:

In normal mode, press this key to toggle between Wind speed/Altitude modes.

In setting mode, press this key can change set item, if now set the last item, then press this
key to out of setting mode.

Press the key for 2s to enter the setting mode (default set item is wind speed unit)

Press the key for 4s to power off the unit. Press the key for 2s again to power on the unit.
6.2 LIGHT key
:

In the wind speed mode, press to toggle between temperature/wind chill

In the Altitude mode, press to toggle between barometric and temperature.

Press the key for 2s to turn on the backlight for 8s.
6.3 + key:

In wind speed mode, press it to change the display current WIND (default) →maximum
WIND →Average WIND.

In wind speed mode, hold this key for 2 seconds, current/Max/Average wind speeds will be
cleared.

In the Altitude mode, press it to change the display Current Relative Altitude (default)
→Maximum Current Altitude →Absolute Altitude.

When display the Current Relative altitude, hold the key for 2 seconds, the current altitude
can be set as “0”.

When display the Maximum Relative Altitude
，
hold the key for 2 seconds, the Maximum
Relative Altitude will be cleared.
7. Wind Speed& Temperature vs. Altitude& Baromtric display
Pressing the “SET” key to toggle between wind speed and altitude display
7.1 Wind Speed& Temperature Display Mode
7.1.1
Wind Speed Display
There are three wind speed display modes:
 Current wind speed (WIND)
 Maximum wind speed (ΔWIND)
 Average wind speed ((ΦWIND)
Sub display: 1.display temperature/wind chill under
wind speed mode. 2. Display barometric and
temperature under Altitude mode.
Main display: Wind speed/Altitude display modes