background image

7

when the Meter is turned off.

Button

Function

SELECT Disables automatic power-off function. Display shows PoFF until the 

button is released.

ENTER

Disable the “beep” function.

• 

The Meter has automatic power-off function (sleep mode), which conserves 

battery power if there is no function change or button press for ten minutes.

• 

The Meter comes out of Sleep mode when a key is pressed or when the rotary 

switch is changed.

• 

To disable Sleep mode, hold down the SELECT button while turning the Meter on. 

• 

Sleep mode is always disabled in the ‘Insulation Test’ mode, or if the auto power-

off feature has been disabled by pressing SELECT when turning the Meter on.

AUTOMATIC POWER-OFF (SLEEP MODE)

HOLD FUNCTION

• 

Press the HOLD button to freeze the displayed value. Press again to release the 

display.

RELATIVE MEASUREMENT

• 

Show the difference between the actual value and the relative base.

• 

Press the REL button to enter relative measurement and the Meter will record the 

initial value when pressing the key.

• 

Displayed value = Actual value - Initial value.

• 

Press the REL button again to exit relative measurement.

• 

Press the SELECT button to view Initial value, when the Initial value is invalid the 

display will read ----.

 

• 

In Insulation test mode, press the TEST button to perform an insulation test until 

the button is released. When the button is released, the screen will display the 

“Hold” sign.

• 

Press the LOCK button, then the screen will display the “Lock” sign.

• 

Press the TEST button and the Meter will perform an insulation test until you press 

the TEST button again.

• 

Lock function is invalid when the timer function is selected.

INSULATION TEST LOCK

STORING TEST DATA

• 

Press the MEMO button so that the meter enters HOLD status automatically.

• 

The LCD screen will display “MEMO” and the memory code on the secondary 

display.

• 

Press    /    button to change the code, press enter to save the data in the preferred 

memory code and the screen will display “SAVE”.

Содержание D03131













Отзывы: