manualshive.com logo in svg

Duratech HAYBUSTER 107C DRILL, Инструкция по эксплуатации и каталог запасных частей

Поделиться
Скачать
Duratech HAYBUSTER 107C DRILL Скачать руководство пользователя страница 50

42

7 7 C   / 1 0 7 C   D R I L L S  

 

O P E R A T I N G   I N S T R U C T I O N S

Step 4.

  Divide pounds of pure seed by the germination percentage to get bulk seed.

 

20.07/0.52 = 38.6 lbs of bulk seed

So 38.6 lbs of bulk seed per acre must be sown to get 12 lbs of pure live seed per acre.

For most seeding, the feed wheel should be aligned as shown above.  Set the pointer on number 8.  The center of the 

feed wheel should be centered in the opening as viewed from outside of the box.

When seeding the grasses listed on page 32, move the feed wheel as shown above.  Set the pointer on number 22, 

the center of the feed wheel should be centered in the opening as viewed form outside of the box.  Generally, a small 

screwdriver or similar tool may be inserted through the opening into the tank and used to push the wheel into position.  

The agitator blades inside the drill box may need to be re-centered over the feed wheels to prevent interference. 

Содержание HAYBUSTER 107C DRILL







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды