Duratax Onyx100 Скачать руководство пользователя страница 3

3

CONTROLS AND CONNECTIONS

WARNING! Do NOT attempt to 

charge one battery through the 
main output lead, and another 

through the jack on the front edge of the 
charger at the same time!! Doing so might 
permanently damage the charger. 

DETERMINING BATTERY TYPE AND SPECIFICATIONS

Always read your NiCd or NiMH battery’s label and/or 
instruction sheet before use. Check your battery’s label or 
instruction sheet to determine how many cells it contains 
or its nominal rated voltage. The chart at right is a quick 
reference for determining this information.

GETTING STARTED

1. Connect the charger to either AC or DC input power. 

2. Select a charge current with the CURRENT SELECTION 
SWITCH. Refer to the chart at right for recommendations. Do 
not exceed the maximum rated charge current for the battery.

3. The red LED will flash very slowly (once every five seconds) 
as a reminder that power is applied to the charger, and it is 
now ready for use.

110V AC INPUT

CURRENT SELECTION SWITCH

STATUS LED: Identifies when 
a battery has been connected 
to the output and fast charge 
has begun automatically. 
Flashes during trickle charge.

OUTPUT LEAD: The standard 
connector is compatible with 
most R/C car batteries. See 
the SPECIFICATIONS chart on 
page 1 for a list of additional 
adapters for charging battery 
types with different connectors.

RADIO BATTERY JACK
A unique jack is located on the front edge of the charger for 
charging 4, 5, or 8 cell NiCd or NiMH radio batteries. This jack 
is universal – compatible with Futaba-J, Airtronics-Z, Hitec, 
JR, and Spektrum receiver battery connectors, as well as 
BEC type connectors.

If charging a battery through the main output lead on the 
right side of the charger, the voltage of that battery can 
be monitored with a separate digital voltmeter through this 
RADIO BATTERY JACK on the front of the charger.

12V DC INPUT

NICD AND NIMH VOLTAGE CHART

Number of Cells

Rated Nominal Voltage

4

4.8V

5

6.0V

6

7.2V

7

8.4V

8

9

.6V

CHARGE CURRENT RECOMMENDATIONS

Battery Rated Capacity Charge Current Setting

600 – 1100mAh

1A

1500 – 2100mAh

2A

2500 – 6000mAh

4A

Содержание Onyx100









Отзывы: