Durasage FRB-2F3, Руководство пользователя и инструкция по эксплуатации

Страница: 12 / 14

9
Trouble shooting
Number
1
2
3
4
Indicator light for
powersupply not
working
Indicator light for
function is not
working
Infrared Heater not
heating up
Odor from the sauna
The connector is not
connected properly
No power supply input
Indicator light is broken
The heating indicator light is
broken
The circuit board or components
are broken
The temperature sensor is broken
The heater is broken
The wire junction or the heater’s
wire is loosen
The temperature sensor is broken
The circuit board of the relay is
not working
The circuit‘s problems
Replace the circuit board
1) There is a plastic bag around,
remove it.
2) Some heater’s temperature
too high, turn off the power
supply and replace it.
3) Parts on the circuitry are
broken.
Check if junction of the
temperature sensor is loose
and replace it
Check and make sure they are
tight
Replace with a new one
of the same specifications
Check if the connection is loose
and replace it
Replace the circuit board
Replace the relevant control
panel
Check the connection or
replace a new one
Check the circuitry ( especially
whether there is power supply
input)
Replace the circuitry panel
Problems Possible reasons Solutions
General content