Instruction Manual
HRP Series Roll Frame Press - V1.1
www.durapac.com
Page 3 of 11
Figure 2 - Press Frame Dimensions
Special skill, knowledge and training may be required for a specific task and the product may not be
suitable for all jobs. The user must ultimately make the decision regarding suitability of the product
for any given task and assume the responsibility of safety for all in the work area. Contact a Durapac
representative if you are unsure of your Roll Frame Presses suitability for a particular application.
2.0
Receiving Instructions
It is recommended prior to use that an inspection be done by qualified personnel and that any
missing or damaged parts, decals, warning/safety labels or signs are replaced with Durapac
authorised replacement parts only. Any Roll Frame Press that appears to be damaged in any way, is
worn, leaking or operates abnormally should be removed from service immediately until such time
as repairs can be made. Any press that has been or suspected to have been subject to a shock load
should be removed from service immediately until inspected by a Durapac authorised service centre.
Owners and operators of this equipment should be aware that the use and subsequent repair of this
equipment may require specialised training and knowledge.
Min. Max.
HRP-50
300 1,300 800
200 2,720 1,000 800 1,200 340 2,000 200
HRP-100
300 1,300 800
200 2,720 1,000 800 1,300 340 2,000 200
HRP-150
300 1,300 800
200 2,900 1,025 800 1,400 340 2,000 225
HRP-200
300 1,300 800
200 2,900 1,025 800 1,300 340 2,000 220
H
Press
Model
A
B
I
J
C
D
E
F
G
