13
Listening to radio
Manual tuning
1. Turn on unit by On/Off button (5) & then press the Function button (4) to select “ FM ” mode.
2. Press the Tune / Skip up or down (8/7) button to change the received frequency in order
to reach your desired FM channel
3. Adjust volume up/down button (13/15) to the desired volume level.
Auto tuning
1. Press Function button (4) to select “ Tuner ” mode.
2. Press and hold the Tuning / Skip up or down button (8/7), the unit will start searching until
reach receive a FM channel, repeat this step until the desired radio station is being reached.
3. Adjust volume up/down button (13/15) to the desired volume level.
Preset stations
You can store up to total of 20 FM radio stations in the memory.
1. Set to FM mode by “Function” (4).
2. Turn to the desired FM station according the above “Listening Radio” instruction.
3. Press and hold “ Pre-up/+10/Pro ” button (12) few second to active program state. Dis-
play will flash with “P 01“.
4. Press Tuning / Skip up or down button (8/7), to select the desired station memory po
-
sition for storage.
5. Press Pre-up/+10/Pro button (12) once again to confirm the setting.
6. Repeat step 2 to 5 to store other stations.
7. Now you can select the presets stations in order by pressing the “Pre-up/+10/Pro” button (12).
The pre-set memories will be cancelled completely if dis-connecting the main power supply.
You are recommended to switch the system into standby mode for convenience usage. There
are 3 seconds for program state, after 3 sec. This state would resume to normal tuner mode
automatically. You can overwrite a present station by storing another frequency in its place.
Playback of MP3 via USB or SD card
Connecting
The system is able to decode and playback all MP3 file which stored in the memory media
with USB connecting port or SD/MMC card.
•
Set the system at off mode first or other function except USB/SD mode.
• Open the USB socket cover then plug-in the USB pen-drive with the face in & make sure
it going into completely or open the SD slot cover then insert the memory card in the
direction of the arrow as shown in the cover of the memory card slot. Insert straight
without bending.
