DURAGRAIN PRIVACY
GATE KIT ASSEMBLY INSTRUCTIONS
USP © 2014
Step 3
Picket and Rail Installation
Slide a Picket into the End Channel as shown in Figure 3a & 3b.
Figure 3a
Figure 3b
Picket
Picket
Upright Post
End Channel
Insert the Pocket Rail to the Upright Post slot and at the same time slide the Pocket Rail groove into the picket, as shown in Figure
3c. Then do the same procedure for the other side Upright Post (Figure 3d).
Figure 3c
Upright Post
Picket
End Channel
Pocket Rail
Pocket Rail
Figure 3d
Use a Square Level for all the corners for proper leveling
and alignment before doing
Step 4
.
IMPORTANT
Slide the remaining Pickets in between the 2 Pocket Rail
grooves and the last Upright Post (Figure 3e).
Figure 3e
End Channel
Pickets
Pocket Rail
End Channel
Picket
Upright Post
Rail
Upright Post
Upright Post
Rail
