![background image](http://html.mh-extra.com/html/duramax/68032/68032_manual_2541227002.webp)
3
A x 1
Wood Top
PARTS
PARTS LIST
2
A
B
B
Tools Required (Not Included)
Spanner 13
Screw Driver
Stud Finder
Level
Speed Square
Socket Wrench 13
Tape Measure
B x 2
Mounting Bracket
C x 4
Expansion Bolt M8
D x 6
CSK Self Tapping Screw
M5 x 90 mm
E x 6
Flat Head Screw
M4 x 25 mm
Drill
Pencil
Drill Bit
( 13mm / 3mm)
ASSEMBLY INSTRUCTIONS
Concrete Wall
Dry Wall
Step 1
C x 4
80 cm
C
C
B
B
D x 6
D
B
D
B
80 cm
IMPORTANT!
Use a Level to check if your
floor is even before making
your measurements.
• Determine and mark the
desired height of the
workbench on the wall
with a pencil.
• Measure 2 3/4” down
from your predetermined
workbench height and
pre-drill a hole with the
13mm drill bit.
• Secure bracket using
bolts provided.
• Note: Distance between
brackets should be
approximately 80cm.
• Repeat the previous
process and install the
second bracket.
• Use a level to make sure
both brackets are level,
and then pre-drill the
remaining holes.
• Make sure the bolts
are securely fastened.
Note: Is your floor level?
IMPORTANT!
Use a Level to check if your
floor is even before making
your measurements.
• Use a stud finder to find
the closest studs and
mark the locations.
•
Determine and mark the
desired height of the
workbench on the wall
with a pencil.
• Measure 2 3/4” down
from your predetermined
workbench height and
pre-drill a hole with the
3mm drill bit.
• Secure bracket using
screws provided.
• Note: Distance between
brackets should be
approximately 80cm.
• Repeat the previous
process and install the
second bracket.
• Use a level to make sure
both brackets are level,
and then pre-drill the
remaining holes.
• Make sure the screws
are securely fastened.
Note: Is your floor level?
13 mm
5 cm
3 mm
5 cm
WARNING
BEFORE STARTING DETERMINE WALL TYPE AND FOLLOW
INSTALLATION INSTRUCTIONS.
Dry Wall:
Do not install brackets directly to dry wall as the surface will not support the weight and can cause serious injury.
Concrete Wall:
If installing directly into concrete, use the hardware provided to secure the brackets and follow installation instructions.