background image

TWO-YEAR LIMITED WARRANTY

                                                                                                         

                             

The manufacturer warranties that this product is free from defects in material and workmanship for 

two (2) years from the date of the original purchase by the original purchaser only.

THIS WARRANTY IS NOT TRANSFERABLE AND DOES NOT COVER:

Products sold damaged or incomplete, sold “as is”, sold reconditioned or used as rental

equipment.

Delivery, installation or normal adjustments explained in the owner’s manual.

Damage or liability caused by shipping, improper handling, improper installation, incorrect

voltage or improper wiring, improper maintenance, improper modification, or the use of

accessories and/or attachments not specifically recommended.

Repairs necessary because of operator abuse or negligence, or the failure to install, operate,

maintain and store the product according to the instructions in the owner’s manual.

Damage caused by cold, heat, rain, excessive humidity, corrosive environments and materials,

or other contaminants.

Expendable items that become worn during normal use.

Cosmetic defects that do not interfere with tool functionality.

Freight costs from customer to vendor. 

Repair and transportation costs of products or parts determined not to be defective.

ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT

MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF THE PRODUCT.

Some states do not allow the exclusion or limitations on how long an implied warranty lasts, so

the above limitations may not apply to you. This warranty gives you specific legal rights, and 

you may have other rights that vary from state to state. 

WARRANTY REPLACEMENT PARTS are available by calling the toll free number, 1-866-456-8934

9

8:30 a.m

.-5:00 p.m., EST, Monday-Friday.

Содержание 26063












Отзывы: