5
Introduction
Ultrasonic Cleaners
These XPD-Series line of ultrasonic cleaners includes four models with sizes ranging
from 11 to 30 liter. Each model is constructed using durable industrial style 32/40 kHz
transducers. These provide increased cleaning power along with built in sweep
frequency to ensure uniform cleaning activity throughout the bath. The five larger sizes
have built in drains. Each model has a digital timer and mechanical thermostat, with a
power switch/fuse in the rear of the machine.
When you first fill your unit
,
or refill it with fresh solution
,
use warm water for the
solution
.
Turn on the heater, set timer and turn on the ultrasonic (press the ON/OFF
touch screen button, and use the arrow buttons for timing purposes)
,
place the cover,
and the solution will heat to temperature.
Accessories for Your Cleaner
Accessories include a cover and a mesh basket. 8 liter unit has drain.
Unpacking Your Cleaner
Please check your cleaner and its carton carefully for any external or internal damage.
If
you find damage, contact your shipping carrier immediately,
before contacting your
distributor. Please retain your packaging for future use
. Take pictures of any damage
while machine is still in the crate.
Installing Your Cleaner
Check the plate on the back of the cleaner for correct power requirements. Position your
cleaner within easy reach of a standard grounded electrical outlet. Do not place the
cleaner on a circuit which could become overloaded.
Connect the Machine to GFI
outlet.
If your cleaner does not operate correctly, first refer to the troubleshooting section for
possible causes
,
or contact an authorized service center listed at the back of this
manual, for additional information.
