INTENDED USE
This trolley jack has a single hydraulic pump piston that effortlessly raises the lift arm. Pump piston dust shields and wiper
seals protect the hydraulic system from contaminants. The jack features an overload valve bypass system to prevent jack
damage and user injury. Compact design allows use in confined spaces. Easily fits under low vehicles. Meets ASME PASE
safety standards.
Jack Stands are designed to support rated capacity, partial vehicle loads consisting of one end of a vehicle. Use both stands
for each operation.
WARRANTY NOTICE
This equipment is covered under a 1-year limited warranty when used as recommended. Only those items listed with a Part #
are available for purchase. For assistance with the operation or the availability of replacement parts, contact our Parts and
Warranty Department at 1-888-448-6746. Please have available a copy of your receipt, the model number of the product,
serial number, and specific details regarding your question.
Not all equipment components are available for replacement; illustrations provided are a convenient reference of location and
position in the assembly sequence.
The manufacturer reserves the rights to make design changes and or improvements to product lines and manuals without
notice.
WARRANTY INFORMATION
We want to know If you have any concerns with our products. If so, please call toll-free for Immediate assistance. For additional
web customer support help inquiries visit the Customer Service section at: 1-888-448-6746.
FOR YOUR SAFETY
AND TO PREVENT INJURY:
Use Service Jack for
lifting purposes
ONLY.
Always support
vehicle with
jack stands.
1. Study, understand, and follow all instructions before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surfaces, with less than 3 degrees of slope.
4. Lifting device only. Immediately after lifting, support the vehicle with appropriate
means.
5. Do not move or dolly the vehicle while on the jack.
6. Lift only on areas of the vehicle as specified by the vehicle manufacturer.
7. No alterations shall be made to this product.
8. Only attachments and/or adapters supplied by the manufacturer shall be used.
9. Do not get under or allow anyone under the vehicle until it has been supported by jack stands.
10. Center load on saddle prior to lifting.
11. Use wheel chocks or other blocking device on opposing wheels before using jack.
12. Never use on a lawn mower or lawn tractor.
13. Do not use this jack for any use other than the manufacturer specified usage.
14. Do not rock the vehicle while working on or around equipment.
15. The following are not recommended for supporting on this equipment: Foundations, Homes, Mobile Homes,
Trailers, RV’s, Campers, nor Fifth Wheels, etc...
16. Failure to heed these markings may result in personal injury and/or property damage.
WARNING
TECHNICAL SPECIFICATIONS
Item
T82454S
2.5TON
Trolley Jack
Jack Stands
Lifting Range
Min. (inch)
Lifting Range
Max. (inch)
Lifting Range
Min. (mm)
Lifting Range
Max. (mm)
5-1/8
13-3/4 13 35
9-13/16
14-15/16 25 38
Capacity