GraphicProducts.com | 800-788-5572
Cleaning Your Toro Max |
17
CLEANING YOUR TORO MAX
8.
Finally, use the swab or cloth to clean
both sides of the cutter blade, by
gently inserting the swab into the
slot of the cutter module and sliding
it from side to side. Repeat this
process for the front and the back
of the blade; the cutter module can
be flipped forward to make the back
easier to reach.
Advanced Cutter Cleaning
If the cutter blade still carries adhesive build-up, you can temporarily separate the metal
cutter assembly from its plastic faceplate for a more in-depth cleaning.
Be careful when performing this advanced cleaning, as the cutter blades are sharp
and could cause minor injury.
1.
With the cutter module
flipped forward, remove the
three Phillips-head screws:
one at the top of the slot,
and one on each side of
the module.
2.
Carefully remove the plastic
faceplate from the metal
cutter assembly.
3.
Use a cleaning swab or soft
cloth with isopropyl alcohol
to remove built-up adhesive
or residue from both sides
of the blade.
4.
Reconnect the metal cutter assembly and its plastic faceplate with the three screws.
