DURAG D-R 290, Руководство по эксплуатации

Страница: 13 / 202

1 | General
D-R 290 13
General
We hope that our products and services will make a significant contribution to your
success. We will be delighted if the information provided in this publication achieves
this.
Should you require information that is not sufficiently covered in this document, please
request the required information from the relevant agent of DURAG GmbH. Our Sup­
port & Service team is also available to answer any questions on DURAG GROUP
products and services. Addresses and telephone numbers can be found on page
DURAG GROUP company addresses.
If anything is not clear:
Please contact the manufacturer! Obtain answers to your questions.
Information on the company and its products can also be found on the Internet at
www.durag.de.
Information on this manual
This manual provides important information on how to use the D‑R 290. Compliance
with all specified safety instructions and guidelines for behaviour is a prerequisite for
safe working.
In addition, the locally applicable accident prevention regulations and general safety
requirements for the device and its application must also be complied with.
NOTICE
Before starting any work, read the Operating manual!
Don't let ignorance lead to personal injuries and damage to the equipment.
In particular read the section 2 Safety [
}
21] and the respective safety instructions in
full.
●
This manual is an integral part of the product and must be kept in the immediate
vicinity of the device, accessible to all staff. Ensure compliance with the instruc­
tions set out for avoidance of hazards and damage.
This manual...
●
always relates to the complete device, even if individual program modules or parts
have not been purchased.
●
or parts thereof may not be reproduced or distributed without express permission
from DURAG GmbH, irrespective of how this is done, in what language or by what
medium, electronic or mechanical.
●
relates to the current design of the device at the time of this documentation being
updated (see page 2 above for production date).
●
contains figures which may differ due to further technical developments or to the
manageable scale of their actual appearance. No claims regarding the supply of
identical products can therefore be derived from the illustrations shown.
Unless otherwise stated: all measurements are in mm
1
1.1