DURAG D-LX 200, Руководство пользователя

Страница: 70 / 116

D − LX 200 InformationCentre PC Version
70
D − LX 200, D − LX 720
Use this entry to call up the program. The following screen appears on the
monitor.
Figure 7.1: InformationCentre front screen
The indicator field "D-LX 200 connected" indicates whether a connection has
been made. If so, this field lights up green. If it remains red, although a
D
− LX 200, D − LX 720 is connected and ready for operation, the
communication interface settings must be checked and corrected if necessary.
Other error sources may be the interface cable, an inadequate electrical
contact and the adapter used.
The COM port and the Modbus slave address set on the D − LX 200, D − LX 720
can be selected in the "Connection" pull-down menu. Details on setting the
Modbus slave address can be found in chapter 8.2 from page 83. This address
is necessary, as the device uses the Modbus protocol. Several nodes can be
connected to one bus. They are selected by means of the different addresses.