Durafly Micro Tundra PNF, Инструкция по эксплуатации, Страница: 6 / 14

5
Insert the main landing gear into the slot
marked "C" at the front of the fuselage.
Squeeze the U/C legs together slightly and
fit one side of the top into the slot, then push
the other side in until it is fully home.
Insert the tailwheel assembly into the socket
in the bottom of the rudder. Be careful as this
is quite a tight fit, support the rudder with one
hand whilst pushing the tailwheel into the slot
with the other.
IInstall the propeller onto the motor shaft then
retain with the aluminum spinner. Screw the
spinner onto the shaft with a small tommy bar
through the hole in the front.
3
4
5