- 8 -
6.3 Steps for Adjusting the Running Belt
a)
Increase the speed to be 5.6km/h.
b)
Turn the bolts at both right and left sides to be half a circuit or a circuit by the 8mm spanner.
( tighten or loosen based on belt grip – refer Diagrams 1 & 2)
c)
After adjustment, if running belt still skips, please repeat the steps above.
Diagram 1: Tighten the running belt Diagram 2: loosen the running belt
6.4 Steps to adjust Running Belt Deflection
Under continuous usage, the running belt can start to be deflected towards one side or the
other. Then it needs to be adjusted. The steps are as follows:
a)
Place the treadmill on a horizontal floor, Increase the running speed to be 5.6km/h.
b)
If the running belt is deflected to the right, adjust the bolt on the right by turning it for half an
circle clockwise, then adjust the bolt on the left by turning it for half an circle counter
clockwise.(see diagram 3)
c)
If the running belt is deflected to the left, adjust the bolt on the left by turning it for half an
circle clockwise, then adjust the bolt on the right by turning it for half an circle counter
clockwise.(see diagram 4
d)
After the adjustment, the running belt still keeps deflecting , please repeat the steps above.
diagram 3: running belt deflected to right diagram 4: running belt deflected to left
Adjustment for right deflection
Adjustment for left deflection
a)
Running board lubrication
The treadmill is equipped with lubricated running board, which needs constant maintenance.
The friction between running board and running belt has a great effect on the treadmills’ e life. So
please lubricate your machine without fail for every 250kms or 6 months of usage, whichever
comes earlier. The steps are as follows:
a)
Cut off the power
b)
Wipe out the dust between running board and running belt with a clean cloth.
c)
Daubing the Silicon oil on the running board and running belt equably.
d)
While adding lubrication oil, please keep your clothes away from the machine for avoiding the
injury.
