Safety Precautions
Please read the following instructions to avoid a fire or electric shock leading to injury or damage of property.
Operational Climate Requirements
Operating
Temperature:50°F 104°F 10
40
～
(
～
)
°C
°C
Humidity:10% 80
non condensing
～
,
-
%
Storage
Temperature:-4°F 113°F 20
45 C
～
( -
～
)
°C
°
Humidity:5% 85
non condensing
～
,
-
%
Cleaning and Maintenance of LED
monitor
Do NOT use any solvent listed below to avoid any damage to the LED monitor and the casing.
Diluent, spray cleaner, corrosive cleaner, acid or alkaline solvent, volatile oil, wax, benzene.
Casing
Do not use rubber or plastic product to wipe the casing to avoid any peeling paint of the casing.
Wipe the casing using a cloth with a little neutral cleaner, and then dry it using a dry cloth.
LED
monitor
panel
The display shall be dusted off periodically with a piece of clean soft cloth to keep clean. Any fluid may
damage the display.
Never wipe the screen using paper or a hard substance.
Make sure to unplug the power cord before cleaning the product.
Caution:
Attention:
Always hold the plug body to pull out the plug.
To handle or clean the LED monitor, switch off the LED monitor and unplug the monitor from the power source.
Never touch the plug with a wet hand.
Others
Always operate the LED monitor with the designated power supply. To guarantee protection, we strongly recommend
that you should install a surge protector device between the main power outlet and AC power supply or AC adapter.
Remove the power plug in case of any abnormality (e.g. noise, smoke or smell).
Always keep the LED monitor away from moisture.
Never operate the LED monitor in case of lightning or storm.
Always keep the LED monitor well ventilated. Never block the ventilation grooves or vents. Keep the LED monitor
at least 4 in. (10cm) away from the wall.
Do not disconnect the power cord while using the monitor.
Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
Please disconnect the power if the display is not used for a long period so as to prevent damage resulted from
electric shocks and abnormal power supply voltage.
Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or
low temperatures, high humidity, exposed to chemical substances or where it operates for 24 hours such as at
airports, train stations, etc. Failure to do so may cause serious damage to your monitor.
Do not insert any foreign or metal objects, such as wire or pen/pencil, or any flammable objects such as paper or
matches, into any vent, headphone port, AV ports or other inputs..
Keep the plastic packaging/bag out of the reach of children.
When viewing a fixed screen for an extended period of time, residual image or blurriness may appear.
Change the mode to energy saving mode or set a screen saver to changing picture when away from the monitor for
an extended period of time.
To prevent eye strain, do not operate in a dark room or against a bright background. For the best visual comfort, be
sure to take a rest of 10 minutes per hour when viewing the monitor for long periods of time.
-6-
