11
11
2
2
3. Attach your battery onto the base charger unit or onto the appropriate adapter plate
and make sure the battery contacts connect with the contact pins. Make sure that the
latching on your battery slides completely under the tabs on the charger plate. If the
battery is properly connected, the red charging light (CHG) will light up, indicating that
the battery is charging. If the red charging light does not turn on, remove the
barrel-plug from the back of the charger then re-insert the plug. To ensure that the
battery and the charger are properly connected, remove the battery from the charger
and reattach. The red charging light will indicate the battery is properly attached and
being charged.
Video instructions detailing proper installation of your battery onto the adapter
plate can be viewed at
www.DuracellDirect.com/support/DRCHCAM
.
4. When the green indicator light (FULL) is lit, the battery is fully charged (Fig E).
5. In order to maximize the capacity of NiMH and NiCad batteries they should be
occasionally discharged. This can easily be done with the charger’s discharge
function. Place the battery on the charger and press the large black button on the
face of the charger base (Fig F). The battery will begin discharging, and this will be
indicated by the yellow light (DIS) turning on. After the battery is fully discharged, it
will automatically switch to charge mode until it is completely charged.
6. To remove the adapter plate from base charger unit, push down on the top of the
plate (Fig G) while sliding the plate to the left (Fig H).
Fig G
Fig H
Fig E
Fig F
Canon
BP-711, BP-714, BP-718, BP-722, BP-729, BP-E77
Base
Canon
BP-608, BP-608A, BP-617, BP-911, BP-911K, BP-914, BP-915,
BP-915L, BP-924, BP-927, BP-930, BP-930R, BP-941, BP-945,
BP-950G, BP-970G
P0265
Canon
D850862201, D850942201, D850972201
P0265
Duracell
DR10, DR10RES
Base
Duracell
DR2, DR3, DR9607, DR9669, DRC915RES, DRC930RES,
DRC941RES, DRP120RES, DRP140RES, DRP220RES,
DRP602RES, DRP70RES, DRSG110RES, DRSG160RES
P0265
Energizer
CCM5260-M
Base
Energizer
ER-C515, ER-C530, ER-C535, ER-C560, ER-C630, ER-C680,
ER-C685, ER-C690, ER-C695, ER-D750
P0265
GE
1CVA157C, 1CVA158C
Base
GE
AV-608
Base
Hitachi
DZ-BP07S, DZ-BP14, DZ-BP14R, DZ-BP14S, DZ-BP14SJ,
DZ-BP14SW, DZ-BP16, DZ-BP21SJ, DZ-BP28, DZ-BP7S,
DZ-BP7SW
P0265
Hitachi
VM-BP82, VM-BP82A, VM-BP83, VM-BP84, VM-BP84A
Base
JVC
AP-V134
Base
JVC
BN-50U, BN-V10U, BN-V11U, BN-V12, BN-V12U, BN-V140U,
BN-V14U, BN-V18U, BN-V20, BN-V20U, BN-V20U, BN-V22,
BN-V22U, BN-V25U, BN-V400, BN-V400B, BN-V400U, BN-V60U
Base
Kodak
1236199, 4E6420, DLKA-14, PRO-14N
P0266
Leica
BP-DC1, BP-DC3
P0265
Magnavox
V80115BK01, V80116BK01
Base
Maxell
DC7460
P0265
Maxell
M6018
Base
Maxell
M7205CL, M7206, M7220, M7260
P0265
Minolta
CVP-16, VBP-600, VBP-601, VBP-630
Base
Panasonic
BN-V18U, BN-V24U, BN-V25U
Base
Panasonic
CGA-DU06A/1B, CGA-DU07A/1B, CGA-DU07E/1B, CGA-DU12,
CGA-DU12A/1B, CGA-DU14A/1B, CGA-DU14E/1B,
CGA-DU21A/1B, CGA-DU21E/1B, CGP-D16A/1B, CGP-D210,
CGP-D220, CGP-D28, CGP-D28A/1A, CGP-D28A/1B,
CGP-D53A/1B, CGR-220A/1B, CGR-D07S, CGR-D08, CGR-D08A/1B,
CGR-D08R, CGR-D08S, CGR-D120, CGR-D120A/1B, CGR-D16,
CGR-D16A/1A, CGR-D16A/1B, CGR-D16S, CGR-D210,
CGR-D220, CGR-D220A/1B, CGR-D28A/1B, CGR-D320, CGR-D54S,
CGR-D815, CGR-D815/A, CGR-D815A, CGR-D815A/1B,
CGR-DU06, CGR-DU06A/1B, CGR-S602A, CGR-S602A/1B,
CGR-S602SE, CGR-S602SE/1B
P0265
Panasonic
DMW-BL14
P0265
Panasonic
HHR-V20A/1B, HHR-V20A1, HHR-V214A/K, HHR-V40A/1B,
HHR-V60A/1B, HHR-V60A1
Base
Panasonic
PV-214, PV-215, PV-251, PV-611, PV-611A, PV-BP15, PV-BP17,
PV-BP18
Base
Panasonic
PV-BP8, PV-DBP8, PV-DBP8A, PV-DBP9A
P0265
Manufacturer
Manufacturer Battery No.
Plate No.
Compatible Batteries
I-DRCHCAM_manual_233x180mm_20080731:I-DRCHCAM 7/31/2008 3:58 PM Page 4
