25
3-3C UpDAtInG thE fIRmWARE
in Windows™
Updating the firmware is a simple operation but one which, if not properly completed, can result in your printer breaking down.
if any problems arise while updating the firmware with dUraBLe Print Center, updates can be downloaded from the website www.durable.eu:
➊
Go to
drivers & Support
, then select your printer model, and click on the
drivers & Firmware
link.
➋
Then click on the file for the corresponding firmware.
➌
Accept the download then save the file in a directory on your hard drive. The file is stored compressed as a zip file. You will need to extract it.
➍
Then double-click on the file in the directory in order to run the firmware installation program.
➎
When prompted by the program, follow the instructions in order to select the printer and start the operation. The firmware download is in progress.
➏
After about thirty seconds, the firmware has transferred to the printer and the operation is complete.
➐
If the printer is not showing a
“readY“
status, this means that the update has not been carried out correctly or, possibly, that the printer is not working
properly. Check the connection cables and run a new update.
The update is complete, and your equipment is ready for use.
never interrupt the transfer between computer and printer during the download phase (powering off the printer or computer,
unplugging a cable). this would result in a complete inability to restart the printer. Should such an incident occur, please
contact the dUraBLe Hotline.
the firmware update can be carried out from the dUraBLe Print Center. to do this, go to your printer properties, then select
Maintenance, then Firmware update.