Duracable DM55, Руководство по эксплуатации машины, Страница: 5 / 24

www.duracable.com sales@duracable.com
5
Model DM55
Lubrication Maintenance
Caution: Do not over oil these points.
• Head Bearing Assembly - The roller bearing, located in the
front assembly, requires monthly lubrication. Use a grease
gun to lubricate the zerk fitting with multipurpose grease. A
lithium-based grease is recommended.
• Reel Shaft and Reel Bearings - The reel shaft requires
monthly lubrication. Use a multipurpose grease or heavy
oil. Keeping the shaft lubricated means the reel will slide
freely and will not ‘freeze’ to the shaft and need to be
repaired. The reel bearings require some light oil monthly.
• Wheels - A light oil on the axle every month keeps the
wheels rolling freely instead of ‘freezing’ to the axle.
Cable Care Instructions
Take care of your cable for optimum performance. The
recommended care procedure is as follows:
• Break in a new cable. To relieve the stress on new cable
that has been coiled since its manufacture, put it in a clean
line and run it for 10 minutes.
• Oil the cable once a week.
• Rinse the cable immediately after each use with the hottest
water available. This is especially important if the cable was
in acid or alkali during use.
• When one end of the cable begins to show wear, rewind
and use the opposite end. (Tip: order the same kind of end
fittings on both ends of the cable.)
• If the cable kinks, cut out the kink and splice the cable ends
together.
Reel Attachment
The reel you select is set in place and slipped onto the reel
shaft. Drive lugs are mounted on the drive plate and slip
through the opening in the back of the reel. The reel is held in
place by the revolving arm.
3/4 HP Motor
175 rpm
10:1 Gear Box
26” Reel
11/16” x 150’ Cable
PCFR
3-Year Warranty
Telescoping Handle
Continuous Weld
Frame Construction
USES:
2” to 10” lines,
Main lines,
Commercial,
Residential,
Industrial,
Grease,
Roots
DM55
with 26PRO, 26” Enclosed Polyethylene Jumbo Reel
DM55
with D1K, 26” Open Metal Spoke Reel
Model DM55
Information and Specifications