Duracable DM30, Руководство пользователя

Страница: 22 / 24

Order Entry: 800-247-4081 • Answer Line: 877-257-1781
22
Duracable
®
Machine Manual
Model DM30
How to Splice DuraFlex
®
Cable
1. Cut a few inches off of each
cable end and remove any
burrs with a grinding disk or
file.
2. Spray Loctite Primer in and
around the cable end and splice
core to thoroughly remove
grease and grime.
3. Apply Loctite Retaining
Compound to splice core.
4. Insert splice core into cable
one turn.
8. Continue turning and the
cable ends will meet at the
center of the splice core.
7. Place vise grips on
free cable end and turn
counterclockwise. 6. Align other piece of cable
onto splice core.
5. Apply Loctite Retaining
Compound to other end of
splice core.
How to Bond End Fittings to DuraFlex
®
Cable
You can attach end fittings and splice cores to DuraFlex cable using a chemical bonding process, which means you can make quick cable
repairs on the job—without welding. With Loctite Primer and Loctite Retaining Compound, you can quickly create a dependable bond that is as
strong as a conventional weld. Please note that these products are not the same thread-locking compounds available in hardware stores and
plumbing-supply houses, they are heavy-duty, permanent-bonding compounds made especially for jobs such as bonding cable fittings.
1. Cut the cable
end and remove
any burrs with
a grinding disk
or file.
2. Spray Loctite
Primer in and
around the
cable end to
thoroughly
remove grease
and grime.
3. Spray Loctite
Primer on the
end fitting to
thoroughly
remove grease
and grime.
4. Apply Loctite
Retaining
Compound to
the end fitting. 5. Using the
wrench (part
number EW),
screw the fitting
into the cable
end until fitting
is totally sealed.
6. The Retaining
Compound will
be fully bonded
to the cable
in just a few
minutes.
1 2 3 4
5
6 7 8
1 2
3
4 5 6