background image

IB-PH5435-WC-E-032805

2

GENERAL

The  FCC  prohibits  customer-provided  terminal  equipment  to  be
connected  to  party  lines  or  to  be  used  in  conjunction  with  coin
telephone service. This phone is hearing aid compatible.

FCC INFORMATION

FCC REGISTRATION

This telephone set is registered with the FCC based upon compliance
with Part 68 of its rules. Connection of this telephone to the nationwide
telecommunications network must be through a standard network jack
(RJ11W or RJ11C) which you can order from your telephone company,
if not already installed.

NOTE

: FCC  registration does  not  constitute  an  expressed  or  implied

guarantee  of  performance.  Only  the  Limited  Warranty  in  this
booklet covers the performance of this telephone set.

IMPORTANT FCC INFORMATION

In  the  event  that  terminal  equipment  causes  harm  to  the  telephone
network, the telephone company should notify the customer, if possible,
that service may be stopped. However, where prior notice is impractical,
the company may temporarily cease service providing that they:
1. Promptly notify the customer.
2. Give  the  customer  an  opportunity  to  correct  the  problem  with

their equipment.

3. Inform  the  customer  of  the  right  to  bring  a  complaint  to  the

Federal  Communications  Commission  pursuant  to  procedures
set out in FCC Rules and Regulations Subpart E of Part 68.

The  telephone  company  may  make  changes  in  its  communications
facilities,  equipment,  operations  or  procedures,  where  such  action  is
reasonably required in the operation of its business and is not inconsistent
with the rules and regulations in FCC Part 68. If such changes can be
reasonably  expected  to  render  any  customer  terminal  equipment
incompatible, the customer shall be given adequate notice in writing, to
allow the customer an opportunity to maintain uninterrupted service.

RINGER EQUIVALENCE NO. (REN)

The REN is useful to determine the quantity of devices you may connect to
your telephone line  and still have all  of  those devices ring when  your
telephone number is called. In most, but not all areas, the sum of the
REN

s of all devices connected to one line should not exceed five (5.0).

You should contact your local telephone company to get the number of
devices you may connect to your line, as determined by the REN.

NOTE

 :

This equipment has been tested and found to comply with the limits for
a  Class  B  digital  device,  pursuant to  Part 15 of  the  FCC  Rules. This
equipment  generates,  uses,  and  can  radiate  radio  frequency  energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. If this equipment
does cause harmful interference to radio or television reception, try the
following:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for assistance.

IB-PH5435-WC-E-032805.pmd

4/1/2005, 12:28 PM

4

Содержание PH-5435



















Отзывы: