background image

IB-PH5560-WC-E-040505

CALLER  ID  FEATURES

Understanding the Caller ID Service

Caller  ID  allows  the  caller

s  phone  number  to  be  shown  in  the  display  between  the  first

and  the  second ring  of  the  call,  also  in  most  cases,  the  caller

s  name,  and  calling  time

and  date.  This  information  will  be  stored  automatically.
In  order  to  use this  feature,  you  must  first  subscribe to  Caller  ID  service.
To  use  the  call  back  feature,  be  sure  to  enter  your  area  code  (see  pages  5  &  6),  and
press  the  CALL  BACK  button  for  correct  digits.

When You Received a Call

The  phone  number  appears  in  the  display  with  the  date  and
time  as  shown  in  the  example  here.
If  your  Caller  ID  service  includes  the  caller

s  name,  the  caller

s

name  also  appears  in  the  display  (up  to  15  letters),  as  well  as
time  &  date of  the  call  (this  varies  by  region).

 - The  call  is  made  through  a  telephone  company  which  does  not  offer  Caller  ID

service  (including international  calls).  The  display will  show 

 UNAVAILABLE 

 

.

 - The call is 

 blocked 

. For privacy reasons, many states allow callers the option to prevent

his  or  her  telephone  data  from  being  displayed  in  the  other  party

s  Caller  ID  display.

The display will  show 

 BLOCKED CALL 

.

 - You  have  picked  up  the  phone  before  the  second  ring.
 - If  the  call  is  from  an  office  which  uses  multiple  lines,  the  displayed  phone  number

may  not  match  the  number  you  use  to  call  that  extension.

Viewing the Caller ID List

The  phone  stores  the  data  of  the  last  81  calls  received  including 

  UNAVAILABLE 

and 

  BLOCKED  CALL 

  calls.  It  keeps  track  of  all  calls  received,  even  if  they  were  not

answered  (for  example,  if  you  are  not  at  home).
You  can  look  through  the  data  in  the  Caller  ID  list  to  check  the  numbers  and  names  of
the  calls  received.
1.  Press  the DOWN  button  to  view  your  calls from  the  newest  call.
2.  Press  the  UP  button  to  view  calls  from  older  calls  to  newer  ones.

NOTE:

If your  telephone is  powered by  batteries, when  the batteries  are weak,  the low
battery  indicator 

  is  displayed.  Change  the  batteries  as  soon  as  possible;

otherwise  the  Caller  ID  list  may  be  erased.

When  you  have  reached  the  last  (newest)  data  by  pressing  UP  button, 

  END  OF

LIST 

 appears. If you press UP button again,  the display will show the first (oldest) call.

When you  have reached the  first (oldest) data  by pressing DOWN  button, 

 END OF LIST 

appears. If you press  DOWN button  again, the display will  show the last  (newest)  call.

You  can  view  the  Caller  ID  list  during  conversation  also  by  following  the  steps  above.

9

NOTE

The  caller

s  phone  number  and/or  name  will  not  appear  in  the  following  cases:

IB-PH5560-WC-E-040505.pmd

4/8/2005, 10:49 AM

11

Содержание H-5560


















Отзывы: