Durabrand DCF2703 Скачать руководство пользователя

Страница: 27 / 71

5-10

L6625EA

S-TNT

Press "MENU" button on the service remote con-
trol unit. Then select "S-TINT" (S-TNT) display.

Press "CH

" buttons on the service remote

control unit so that the value of "S-TINT" (S-TNT)
becomes 59.

C-TNT

Press "MENU" button on the service remote con-
trol unit. Then select "COMPONENT TINT" (C-
TNT) display.

Press "CH

" buttons on the service remote

control unit so that the value of "COMPONENT
TINT" (C-TNT) becomes 58.

SHARP

1. Press "MENU" button on the service remote con-

trol unit. Then select "SHARPNESS" (SHARP) dis-
play.

2. Press "CH

" buttons on the service remote

control unit and select "47."

S-SRP

1. Press "MENU" button on the service remote con-

trol unit. Then select "S-SHARPNESS" (S-SRP)
display.

2. Press "CH

" buttons on the service remote

control unit and select "47."

C-SRP

1. Press "MENU" button on the service remote con-

trol unit. Then select "COMPONENT SHARP-
NESS" (C-SRP) display.

2. Press "CH

" buttons on the service remote

control unit and select "47."

Note: BRIGHT data value does not need to be adjust-

ed at this moment.

4. Black Stretch Control Adjustment

Purpose: To show the fine black color.

Symptom of Misadjustment: Black color will not
appear correctly.

Note: Use service remote control unit.

1. Enter the Service mode. (See page 5-8)

2. Press "6" button on the service remote control unit.

"B-S" is indicated.

3. Press "CH

" buttons on the service remote con-

trol unit so that display will change "OFF," "0," and
"1." Then choose "B-S OFF."

4. Press "6" button on the service remote control unit.

"B-S2" is indicated.

5. Press "CH

" buttons on the service remote

control unit so that display will change "0" and "1."
Then choose "B-S2 0."

6. Turn the power off and on again, using the main

power button on the TV unit.

5. Purity Check

1. Enter the Service mode. (See page 5-8)

2. Press "7" button on the remote control unit. Each

time pressing 7" button on the remote control unit,
display changes Red mode, Green mode, Blue
mode, and White mode cyclically.

3. Select White mode.

4. Turn the power off and on again. (Main power but-

ton on the TV unit.)

6. SD Check Mode

1. Enter the Service mode. (See page 5-8)

2. Press "1" button on the remote control unit. The

unit enter the SD-Check mode.

3. The unit starts selecting the added channel from

first channel according to the memorized CH ADD/
DELL data and CATV/TV data in RAM.

Содержание DCF2703








































































Результаты поиска

Содержание DCF2703

Отзывы:

Похожие инструкции для DCF2703

Бренды по названию

Популярные бренды

Durabrand DCF2703, Руководство по обслуживанию

Результаты поиска

Содержание DCF2703

Отзывы:

Похожие инструкции для DCF2703

Бренды по названию

Популярные бренды