IB-CDR1907-WM-E-042607
Playing other Audio Devices through your Set
You can enjoy the music of a digital MP3 player, computer or any other external audio
device (with a 3.5mm stereo jack) through the set.
1
Insert an audio cable (not included) with 3.5mm plugs on each end into the
HEADPHONES jack or LINE OUT jack of your MP3 player or computer, and the
other end into the AUDIO IN jack of this set. This cable is available in any electronic
store.
(3.5 mm)
(3.5 mm)
OR
2
Connect the supplied AC power cord (see page 3).
3
Slide the FM/AM/CD/AUDIO IN switch to CD/AUDIO IN position and the BUZZER/
AUTO/OFF/ON switch to ON position.
4
Turn on your MP3 player or computer, adjust the VOLUME control of the MP3
player/computer and this set
’
s volume to the desired level.
5
Slide the BUZZER/AUTO/OFF/ON switch to OFF position after use.
NOTE 1:
When connecting an audio player to the set while the set is playing a CD, the
set will exit CD mode and switch to AUDIO IN mode automatically.
NOTE 2:
Make sure to disconnect the audio cable from the AUDIO IN jack at the left
side of the set when playing a CD.
NOTE 3:
Remember to unplug the AUDIO IN if you want the set to wake you up from
CD in the morning.
6
NOTE 4:
Remember to slide the BUZZER/AUTO/OFF/ON switch to BUZZER or AUTO
position after listening, so that the buzzer alarm, CD music or radio will wake
you up at your preset time (see page 8).
IB-CDR1907-WM-E-042607.pmd
4/27/2007, 12:13 PM
7
