IB-CD916(CDR79AD-60J8)-WM-E-010805
1
Slide the CD(RADIO)/FM/AM FUNCTION
switch (on the left side of the set) to AM or
FM position to select the desired wave band.
2
Tune into the station you prefer using the
TUNING control, the station
’
s frequency
will be displayed in the readout. Adjust for
RADIO OPERATION
the clearest s ound or the station
’
s
frequency if known.
3
If you tune into an FM stereo station,
“
FM
ST
”
will show in the display.
4
Adjust the VOLU ME c ontr ol to your
listening preference.
5
If you prefer more bass, slide the BASS
BOOST switch to ON position.
6
To turn off the radio, slide the CD (RADIO
OFF)/FM/AM FUNCTION switch to CD
position.
9
CD(RADIO OFF)/
FM/AM
function switch
TUNING control
MHz
FM
ST
NOTE 1:
When using the headphones, the headphone
’
s wire is the FM antenna. Adjusting the
length and the position of the headphone
’
s wire can improve the FM reception. Touching
the headphones wire during FM play may affect reception of weak stations.
When using the LINE OUT jack to connect with home stereo, the line out cable can
also be used as FM antenna. To have better FM reception, it is also recommended
to insert the headphones and adjust its position, for use as the FM antenna.
NOTE 2:
Slide the MONO/STEREO switch to MONO can reduce the noise and improve the
effect of the FM reception, because stereo broadcasts are weaker by nature.
Frequency of
received station
NOTE 3:
This set uses an analog (rotary) tuner with a digital display. The digital display is very
useful when locating your favorite station and also assists you to pinpoint the exact
tuning frequency. This set does not have radio memory presets.
IB-CD916(CDR79AD-60J8)-WM-E-010805.pmd
2/23/2005, 11:49 AM
10
