background image

Chapter 1 

Safety and Maintenance 

You can use your computer under a wide range of environmental 
conditions. However, to ensure long use and continued high 
performance, consider the following factors when setting up your 
computer:  

• 

Follow all warnings and instructions noted in this documentation 
and in the Windows Help program. 

• 

The first time you use your computer, we recommend that you 
carefully read the Making Connections section of this manual and 
initialize the battery to ensure optimum battery performance. 

• 

Unplug the computer from the power outlet before cleaning. Do 
not use aerosols, solvents, or strong detergents. 

• 

Do not use the computer near open water or other liquids. Never 
spill liquid onto the computer. 

• 

Do not place the computer in an unstable location where it might 
slip or be knocked over. Serious damage could result from a fall. 

• 

Slots and openings in the system cabinet are for ventilation 
purposes. Do not block or cover these openings or the system 
could overheat. Do not use or store the computer near a source of 
heat or dust. 

• 

On the base or rear panel of this notebook, there is a label with 
information on the power requirements of this system. These 
requirements must be followed. If you are unsure of your local 
power supply, consult your dealer or local Power Company. 

• 

Do not step on or place anything on the power cord. 

• 

If you use the computer with an extension cord, ensure that the 
total ampere ratings of all the devices sharing the extension do not 
exceed the rating of the extension cord or the rating of the wall 
outlet. 

• 

Never push foreign objects into the computer through any of the 
slots or openings. Dangerous voltages are present, which could 
cause electric shock or fire, or damage sensitive components.  

• 

For best results, use a power strip with a built-in surge protector. 
Do not use inferior extension cords as this may result in damage 
to your computer. 

Содержание D13RL

































































Отзывы: