Version 20190806 Page
3
SETTING UP THE TRANSMITTER
Any blinking numbers on the LCD screen indicate the system is awaiting user’s input. Using the “
＋
” and “
－
” buttons (Fig. 7)
to increase or decrease the numbers, and press “OK” button to set / confirm. If no change / action is made within 15-seconds,
the system will accept the numbers and finish the procedure.
SETTING THE CLOCK (Fig.7)
1. Press and hold the TIMER button on the transmitter for three seconds. The hour digit(s) will become blinking.
2. Press the “
＋
” and “
－
” button to set.
3. After setting the desired hour, press and release the TIMER button again to set the minutes.
4. Press and hold the TIMER button again for three seconds to finish setting. You can also press the OK button to finish
setting.
CONVERTING ºF / ºC SCALE
The default setting for temperature is ºF. To change the setting from ºFto ºC (or ºC to ºF), first press and hold the “
＋
” and
“
－
” buttons on the transmitter simultaneously (Fig. 7). The highest set temperature is 99º Fahrenheit = 37º Celsius.
Fig. 7
REMOTE RECEIVER BOX (Fig. 9)
Power Source: Input 100-240VAC (universal voltage). USB power cord + adapter with US 2-prong plug.
The r
emote control receiver box equips with two 18 gauge signal wires (Temperature resistance 200
℃
Max.)
LEARN / PAIR TRANSMITTER WITH RECEIVER BOX
Pair the transmitter with receiver first if they do NOT communicate. To have the receiver box to accept the transmitter’s
signal (code), please follow the steps below:
1. Unplug the receiver box from power source before LEARN process. Then, plug-in again.
2. Press the “LEARN” button on receiver (Fig. 8) for 1 second, then the receiver box will
sounds of quick BEEP X 2 (♫, ♫)
.
3. Press the MODE button on transmitter (Fig. 7). The receiver box will beep to indicate that the transmitter’s code has been
captured by the receiver. It means the LEARN process is completed.
If you fail the LEARNING of matching the security code, please wait 2 minutes before another try. The interval allows the
microprocessor in the receiver box to reset itself and available for accepting new code. Please try more times.
Any questions, please email us.
The remote receiver box has a 3-position slide switch (ON / REMOTE / OFF) and a LEARN button on the side panel (Fig. 8).
